English
The role of pipe tapering machine in the manufacturing industry is getting more and more attention, so how to effectively maintain it? How does the pipe tapering machine work? What is the application of pipe tapering machine?
l What is the purpose of the pipe tapering machine?
l How does the pipe tapering machine work?
l How to maintain the pipe tapering machine?
Taper machine can reduce the diameter of steel pipe end. pipe tapering machine can process stainless steel pipe, carbon steel pipe, aluminum pipe and so on. Finished steel pipes can be used in decorative areas, such as sofa legs, stool feet, storage shelves, etc. tapering machines can be used in many applications such as construction, naval and Marine, plumbing, steel furniture, cars, motorcycles, etc.
1. The pipe tapering machine is driven by the continuously variable speed motor to drive the mandrel of the drive shaft, which is interlocked by a helical gear and two straight gears on the mandrel to pull the steel belt. The steel belt is wrapped around the mandrel after being flanged by four groups of roller pressure waves, and then becomes a spiral bellow after being pressurized by the closing wheel, embossed by the compacting wheel and compacted by the compacting wheel.
2. The pipe maker passes the tape to the pipe welder through the feeder, extruded the tape to shape it through a roller, and then welds and calibrates the pipe with a calender-welding mix. The pipe is cut off by the calender mechanism and adjusted by the altener. The spot welder is used for spot welding between strips. This type of pipe tapering machine is a complete set of comprehensive equipment which continuously welds the belt material into the pipe, and adjusts the circle and straightening.
1. Check the oil level on the tank frequently, and the oil level shall not be lower than the specified value.
2. Fine oil filter is blocked by dirt need to be replaced in time; The crude oil filter should be cleaned in time when it is blocked, once every 3 months.
3. To add oil to the tank, it must be filtered. The oil should not be mixed with impurities such as moisture, rust, metal chips and fibers.
4. When starting the oil pump in winter or cold areas, it should start and stop, repeat several times, so that the oil temperature rises, and then start to work after the hydraulic pump station operates flexibly.
5. Hydraulic pump station all knobs, non operator shall not tamper.
6. Often observe whether the power supply voltage has abnormal fluctuations, and every 3 months or so overhaul.
The correct maintenance of pipe tapering machine plays a very positive role in the service efficiency and life of the equipment. If you are looking for a supplier of high quality pipe tapering machine at a reasonable price , the slsmachinery is a very good choice.
