Home > News

What is Going on With the Pipe Bending Machine?

What is the smoke of the Pipe Bending Machine?

(1) If the ambient temperature is too high (more than 40 °C), the air blower is too hot and the heat is difficult to be cooled.

(2) The cage rotor broken strip or the wound rotor coil joint is loose, causing the maintenance network current to be too large and heating. The copper strip rotor can be repaired or replaced, and the rotor should be replaced for the cast aluminum rotor.

(3) The bearing is damaged or worn excessively, so that the stator and the rotor are rubbed against each other. The bearing can be checked for looseness and the stator and rotor are poorly assembled.

(4) The fan inside the tube bender such as the CNC Tube Bender Machine is damaged, installed or not installed, and should be properly installed. The damaged fan should be repaired or replaced.

(5) The winding wiring is wrong. If the star is connected to a triangle, or the triangle is connected to a star by mistake, running under the rated load will cause the bending machine to overheat and should be checked and corrected.

We are Pipe Bending Machine Supplier. If you have demand, welcome to contact us.

Pipe Bending Machine Supplier


HOT PRODUCTS

Copyright © SLS All Rights Reserved | Sitemap