50NC Type C Or U Shape Bending Two Tubes Together Double Head Pipe Bender Machine
Main Technical Parameters Sheet
Brief Introduction on Double Head Pipe Bender Machine
SLS 50NC Type C Or U Shape Bending Two Tubes Together Double Head Pipe Bender Machine.Double head bending will give you the change to be up to 8 times faster than a standard single head mandrill bender,it will provide maximum productivity for your job. The single-head pipe bender can only bend one bend at a time, while the twin-head pipe bender can bend both ends of the pipe at the same time, which is especially suitable for symmetrical pipe bending. The double-head bending is a non mandrel bending machine. The principle is that the bending die hold on its position, and after the clamp die clamp the tube, it moves in a circular motion winding the center of the bending die to form the pipe into the desired shape. However, this bending process has certain restrictions on the size and bending radius of the pipe, and is more suitable for small pipe diameters with a bending radius of 3-5D. Depending on the diameter of the pipe, the tools can be designed to bend 2-4 pipes at the same time. The two head pipe bender has high flexibility, it can work simultaneously at both ends, or work separately at both ends. It adopts NC control system, the setting is simple and easy to understand, and it is easy to use. It is the best choice for high-efficiency non mandrel bending.
Features on Double Head Pipe Bender Machine
Automatic Hydraulic Double Head Bending.
Standard 90∘head rotation for 3D bending
Adjustable bending angle from 0 to 180 degrees
Fixed bending die for easy placement of tube in place prior to bending
The distance between two heads is 200mm to 1800mm
Standard 90∘head rotation for 3D bending
The distance between two heads is 200mm to 1800mm
Adjustable bending angle from 0 to 180 degrees
Different degrees of bending can be set on each side
Fixed bending die for easy placement of tube in place prior to bending
Simple and quick mold change
Simple and quick adjustment of elbow angle and center distance
Dies can be 2 or 3 depending on the pipe diameter.
Provides a water cooling system, which is convenient for users to control the oil temperature and ensures that the equipment can work stably for a long time under high temperature.
Available Pipe Material: Steel, Stainless, Aluminum, Titanium and Brass...
Available Pipe Shape: Round, Square, Rectangle, Oval, Solid Bar, Angle Iron, Aluminum Extrusions, Flat Stock and Other Profiles...
Electric: As Required (3 Phase 220V Or 380V Or 415V...)
Main Application
Packaging & Shipping
Contact Us